SOS

Insights

5 Google Ads settings that quietly waste local business budgets

9 min read

A business owner at a desk reviewing a Google Ads settings screen on a laptop, with a phone and a paper appointment calendar beside it.

The Google Ads settings that waste money for local businesses are mostly defaults, not mistakes anyone made on purpose. The five to check first are location targeting set to "Presence or interest," search partners or the Display Network running inside search campaigns, broad match paired with weak conversion tracking, auto-applied recommendations, and ad schedules that run when no one answers the phone. Each takes minutes to check, and none requires you to be a specialist.

None of these settings is wrong for every account. Each is a default that suits Google's goals (more reach, more volume, more automation) and may not suit a business that needs a few qualified calls or consults a week. The sections below explain what each setting does, where to find it, what to change, and when to leave it alone.

The Google Ads settings that waste money, at a glance

SettingWhere to lookSafer choice for most local businesses
Location optionsCampaign settings, LocationsPresence only
NetworksCampaign settings, NetworksSearch partners and Display off until proven
Broad match with Smart BiddingKeywords, plus Goals, ConversionsOnly with clean, qualified conversion tracking
Auto-apply recommendationsRecommendations, Auto-apply settingsOff, or reviewed by a person
Ad scheduleAudiences, keywords and content, Ad scheduleMatch the hours someone answers

1. Location targeting set to "Presence or interest"

When you target a city or radius, Google asks who counts as being there. The default option is labeled "Presence or interest" and marked recommended. It includes people in your area, people who regularly spend time there, and people who have shown interest in it.

"Interest" is the part that costs you. Someone in another state who searched for "dentist near Phoenix" or read about your city can see your ad and click it. You pay the same for that click as for a neighbor's, and that person cannot book a service call or a consult.

To check, open a campaign, go to Settings, expand Locations and look at Location options. Then open the geographic reports (user locations) and see where your clicks and conversions actually came from. If a meaningful share of spend lands outside your service area, this setting is the likely cause.

To change it, select "Presence: People in or regularly in your targeted locations" and save. Do this in every campaign, since the setting is per campaign. Also add exclusions for neighboring areas you don't serve.

The default is fine for destination businesses. A plastic surgeon who draws patients from several states, or a med spa in a tourist market, may want people who are researching the area. In that case, don't rely on the loose "interest" signal. Add the specific home markets you want as locations and keep Presence for everything else.

2. Search partners or the Display Network inside search campaigns

A search campaign is meant to show your ad when someone types a query into Google. Two network options stretch it past that. Search partners are other sites that run a search box, and the Display Network is a vast set of websites and apps where ads appear next to content. Google's Ads help center says search partners are included by default when you create a Search campaign, and it points advertisers with performance problems to check their Display settings too.

Clicks from these placements tend to be cheaper, which makes cost per click look healthy. The problem is intent. A homeowner reading an article who sees a roofing ad is in a different state of mind from one typing "roof leak repair near me."

To check, open campaign Settings and look at Networks. Then segment your campaign table by "Network (with search partners)." That splits clicks, cost and conversions into Google Search, search partners and, where relevant, Display. Compare cost per real lead across rows, not cost per click.

To change it, untick "Include Google search partners" and the Display Network box in the campaign settings. Google's Search Network help page walks through the steps. If you want Display, run it as its own campaign with its own budget and purpose, such as reminding past site visitors.

Search partners can be fine. If the segment report shows partner traffic producing qualified calls or forms at a cost you accept, leave it on. The point is to make the network earn its place with your own numbers.

3. Broad match with automated bidding but weak conversion tracking

Broad match lets Google show your ad for searches it considers related to your keyword, not only searches containing your words. Smart Bidding is Google's automated bidding, which sets each bid at auction time to get more of whatever you've defined as a conversion. Google's help center says broad match pairs particularly well with Smart Bidding strategies such as Maximize conversions and Target CPA. It also cites an average increase of about 25% more conversions in Target CPA campaigns when advertisers switch phrase keywords to broad match. That is Google's figure for its own product, and it assumes the conversion signal is good.

That assumption is where local businesses get burned. Smart Bidding doesn't know what a good lead is. It chases whatever your account counts. If "conversion" includes page views, button clicks, five-second phone calls or spam form fills, broad match will go find more of those, and the dashboard will look successful while the phone stays quiet. Our article on conversion tracking that counts the right things covers the setup in detail.

To check, open Goals, then Conversions, then the summary. Look at which actions are marked Primary, since those drive bidding. Ask whether each one represents a qualified lead. For calls, check the minimum call length. Then compare the conversions Google reports with your booking system or CRM for the same month. A large gap means the signal is weak.

To change it, make only qualified actions Primary (a booked consult, a form with a valid phone number, a call of meaningful length) and demote the rest to Secondary. If you can, import booked or signed outcomes back into Google. Until tracking is clean, stay with exact and phrase match, and keep reading the search terms report weekly to catch drift. Google also notes that some Smart Bidding strategies rely on a minimum volume of historical conversion data, so a campaign producing a handful of leads a month gives the system little to learn from.

Broad match is fine when tracking is clean, volume is steady and someone reviews search terms regularly. A busy HVAC company with call tracking tied to booked jobs is a reasonable candidate. A new law firm campaign with a few form fills a month is not.

4. Auto-applied recommendations

The Recommendations page suggests changes to your account, and the Auto-apply settings let Google make some of them without asking. Google's help center describes where to find them: Recommendations, then Auto-apply settings, with a History tab that shows what was applied and when.

The risk is that the suggestions serve Google's measures of growth (more traffic, more spend, more automation), not your appointments. Accounts that opted in, sometimes through a setup prompt or an earlier agency, may have changes made that nobody on your team approved or remembers.

To check, open Auto-apply settings and read the History tab. Note what was changed and compare against any jump in spend or drop in lead quality. To change it, open the same screen and turn off each subscribed recommendation. Our guide to which auto-applied recommendations to turn off goes through the common ones.

Leaving some on can be fine if you review the result afterward. The ones to switch off are anything that changes budgets, bids, keywords or campaign settings, because those directly move your money.

5. Ad schedules that run when nobody answers the phone

If you set no ad schedule, ads run around the clock. For a business whose main conversion is a phone call, that means paying for calls that reach voicemail at 11 p.m. Many callers don't leave a message. They call the next business on the list.

Be aware of how automation interacts with this. Google's help says that with Smart Bidding, manual schedule bid adjustments aren't used, though ads still follow the days and times you set. So a +20% on Saturdays does nothing, but a schedule that stops ads at 6 p.m. does stop them.

To check, open Ad schedule under Audiences, keywords and content, and view performance by hour of day and day of week. Then compare to your phone system: which hours produce missed calls, and which produce booked work? Also check any call assets or call-only ads, which have their own schedule.

To change it, limit ads to the hours someone answers, or add an answering service or after-hours intake that books appointments. A med spa that closes at 6 p.m. may do better if evening ads send people to an online booking form, not a phone number.

Running all hours is fine when you have live dispatch. Emergency plumbing and HVAC companies that staff phones 24/7 should keep nights and weekends on. Personal injury and family law searches often come in late, so a firm with a 24-hour intake line may want them too. For form-based leads, evening clicks can be valuable if someone follows up quickly the next morning. Let the booked-lead data decide, not the clock.

A one-hour review order

Start with location options and networks, since those are quick toggles. Next, check conversion actions and which are Primary, then the auto-apply history, then the ad schedule against your call logs. Make one change at a time and note the date, so you can see what moved.

If you'd rather have a second set of eyes, SEOS offers a Google Ads wasted-spend audit that is read-only, so nothing in your account is changed. For accounts spending $3,000 or more a month, it includes a free snapshot of the top leaks. For a broader view of why clicks aren't becoming clients, see why Google Ads get clicks but no bookings, and for home service companies weighing channels, Local Services Ads versus Google Ads.

Frequently asked questions

Will changing these settings lower my traffic?

Yes, usually. You are removing clicks from people outside your area, from lower-intent placements and from hours you can't answer, so click volume falls. Judge the change by leads and booked work, not clicks.

Should I turn off search partners for every campaign?

Not automatically. Segment your results by network and compare cost per qualified lead. If partners deliver real leads at an acceptable cost, keep them. If they only deliver cheap clicks, turn them off.

Is broad match always a bad idea for a local business?

No. It works when your conversion tracking counts only qualified leads and you have steady volume. It wastes money when the system is learning from page views, short calls or spam forms.

How do I know if auto-apply is already on?

Go to Recommendations, then Auto-apply settings. Google's help center says the History tab shows what was applied and when. You can also check Admin, Account Settings, Auto Apply.

Get a free SEO and AI visibility audit.

Request a free visibility audit. We will show you which services you could be winning on Google, Maps and AI assistants, what your competitors are doing, and what it would take to be the answer.